PRODUCTS CENTER
Top HV low condensation hydraulic oil
Overview
Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
Main performance
It has better high and low temperature performance than general anti-wear hydraulic oil, provides excellent low temperature start performance, low temperature flow performance and high temperature protection, and effectively extends the service life of the oil.
Excellent viscosity-temperature performance, shear stability, oxidation stability, small viscosity change, make the hydraulic system work more smoothly.
Excellent anti-wear performance, anti-rust and anti-corrosion performance, provide effective protection for hydraulic equipment.
Excellent seal adaptability to prevent oil leakage.
use
It is suitable for medium and high pressure hydraulic systems in the open air, cold areas and where the ambient temperature changes greatly or the working conditions are harsh.
Main Specifications
project |
Quality Index |
experiment method |
||
Grade |
TopHV32 |
TopHV46 |
Super HV68 |
|
Kinematic viscosity,(40℃)mm2/s |
33.4 |
47.8 |
70.1 |
GB/T265 |
Open flash point,℃ |
230 |
239 |
240 |
GB/T3536 |
Pour point, ℃ |
-39 |
-37 |
-35 |
GB/T3535 |
(The typical data here is an average value and is for reference only. The specific value may vary with each test condition or customer requirements)
Packing specification
This product is packed in 18L plastic drum and 170kg iron drum.
Precautions for use
1. Keep the system clean and remove the sludge and metal chips in the fuel tank in time.
2. Select or change the oil according to the equipment oil selection and oil change reference index. When changing the oil, the hydraulic parts of the equipment should be cleaned to prevent impurities from being mixed into the oil and affecting the use effect.
3. During storage and use, the container and refueling tools must be clean to prevent the oil from being contaminated.
Health, safety and environmental protection
1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.
2. It should be noted that used lubricants contain potentially harmful pollutants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.
3. If the user does not follow the use specifications or precautions, or even not in the specified use, Shandong Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.
- Name of product
- Product Introduction
- Top XA composite aluminum grease
- Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
- MORE
- Top XLD universal low noise bearing grease
- Product Introduction Top XLD universal low-noise bearing lubrication system is manufactured by imported mineral base oil thickened with high-grade fa
- MORE
- Top XLE small and medium motor bearing grease
- Product Introduction Top XLE medium and small motor bearing grease is refined by advanced production technology with fatty acid lithium soap thickene
- MORE
- HL high temperature resistant synthetic heat transfer oil
- Product Introduction It is made from chemically synthesized base oil after adding a certain proportion of high-efficiency compounding agent and other
- MORE
- High temperature resistant synthetic heat transfer oil
- Product Introduction It is made from synthetic base oil by adding a certain proportion of high temperature resistant compound additives and refined b
- MORE
- HL-400 liquid and gas phase heat transfer oil
- Product Introduction The liquid and gas phase heat transfer oil is a eutectic mixture of biphenyl and diphenyl ether copolymerized with a mass ratio
- MORE
- Top HV low condensation hydraulic oil
- Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
- MORE
- Top HFC water-glycol fire resistant hydraulic oil
- Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
- MORE
- Top AHM ashless anti-wear hydraulic oil
- Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
- MORE
- Super MHM special anti-wear hydraulic oil for construction machinery
- Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
- MORE
Official WeChat Scan to follow
COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd. 鲁ICP备15562099号-1 Powered by: 国际站建设:中企动力 淄博 外贸Google推广