PRODUCTS CENTER
Top XLD universal low noise bearing grease
Overview
Top XLD universal low-noise bearing lubrication system is manufactured by imported mineral base oil thickened with high-grade fatty acid lithium soap with anti-oxidation, anti-rust and other additives through a special process in a high-clean environment.
Main performance
The soap fiber structure of the thickener is fine;
It has excellent rust and oxidation resistance;
It has high cleanliness and meets low noise requirements;
It complies with ROHS standards.
use
It is suitable for the lubrication of various types of low-noise bearings, such as: office equipment, main axle of machine tool, automotive electronic parts bearings, clutch motors, motorcycles and other motor bearings.
Operating temperature range: -20℃~120℃.
Main Specifications
Reference value: The decibel value of Z3 group (6202) bearings can be reduced to: 24~25dB
The decreasing amplitude of decibel is expected to be 3 seconds during the vibration test.
Project |
Typical data |
experiment method |
|
2# |
|
Working cone penetration 0.1mm |
275 |
GB/T269 |
Dropping point, ℃ |
196 |
GB/T4929 |
Anti-corrosion (52℃, 48h) level |
First level |
GB/T5018 |
Oxidation stability (99℃, 100h, 0.76MPa) pressure drop MPa |
30 |
SH/T0325 |
Extend working penetration (100,000 times) 0.1mm |
298 |
GB/T269 |
Noise value (6201 bearing) Start the abnormal sound value N Running noise value N |
2 2 |
JS2702(004) |
(The quality index data here is an average value and is for reference only. The specific value may vary due to each test condition or customer requirements)
Packing specification
This product is packed in 15kg plastic drums.
Precautions for use
1. Any lubrication products shall be stored indoors or under shelters.
2. When it needs to be stored outdoors unavoidably, placing it horizontally shall be considered first to avoid intrusion of rain or humid air and prevent the markings on the oil drum from being corroded.
3. The product shall not be stored in an environment exceeding 60°C or severely cold environment, and shall not be exposed to strong light, and shall be sealed protected from light for preservation.
Health, safety and environmental protection
1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.
2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.
3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.
- Name of product
- Product Introduction
- Top XA composite aluminum grease
- Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
- MORE
- Top XLD universal low noise bearing grease
- Product Introduction Top XLD universal low-noise bearing lubrication system is manufactured by imported mineral base oil thickened with high-grade fa
- MORE
- Top XLE small and medium motor bearing grease
- Product Introduction Top XLE medium and small motor bearing grease is refined by advanced production technology with fatty acid lithium soap thickene
- MORE
- HL high temperature resistant synthetic heat transfer oil
- Product Introduction It is made from chemically synthesized base oil after adding a certain proportion of high-efficiency compounding agent and other
- MORE
- High temperature resistant synthetic heat transfer oil
- Product Introduction It is made from synthetic base oil by adding a certain proportion of high temperature resistant compound additives and refined b
- MORE
- HL-400 liquid and gas phase heat transfer oil
- Product Introduction The liquid and gas phase heat transfer oil is a eutectic mixture of biphenyl and diphenyl ether copolymerized with a mass ratio
- MORE
- Top HV low condensation hydraulic oil
- Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
- MORE
- Top HFC water-glycol fire resistant hydraulic oil
- Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
- MORE
- Top AHM ashless anti-wear hydraulic oil
- Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
- MORE
- Super MHM special anti-wear hydraulic oil for construction machinery
- Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
- MORE
Official WeChat Scan to follow
COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd. 鲁ICP备15562099号-1 Powered by: 国际站建设:中企动力 淄博 外贸Google推广