logo

  EN

搜索
确认
取消
产品中心

产品中心

PRODUCTS CENTER

Senior AN Spindle Oil

Product description

Overview

Senior AN spindle oil is made from highly refined light component base oil with anti-wear, anti-rust and other additives. It is in accordance with SH 0017-90 standard.

Main performance

Good viscosity-temperature performance, excellent lubricity and abrasion resistance, extend the life of the spindle and bearing; reduce noise; good oxidation resistance.

USE

This product is colorless, suitable for the lubrication of spindles and bearings of high-tech equipment, precision machine tools and textile equipment with high speed and small gap. It is especially suitable for the lubrication of knitting and spinning spindles, as well as the high-speed bearings of machine tools. It can also be used as a low-viscosity hydraulic oil.

Main Specifications

Project

Quality Index

Experiment Method

Grade

AN5

AN7

AN10

AN15

 

Kinematic viscosity, mm2/s (40℃)

4.4~6.5

6.5~8.5

9.0~11.0

13.5~16.5

GB/T265

Acid value, mgKoH/g

0.4

0.4

0.4

0.4

GB/T264

Open flash point, ℃ not lower than

90

115

130

150

GB/T3536

Freezing point, ℃ not higher than

-10

-10

-8

-8

GB/T510

Corrosion test (copper sheet, 100℃, 3h)

Qualified

GB/T0195

(The typical data here is an average value, for reference only, the specific value may vary due to each test condition or customer requirements)

Packing specification

This product is packed in 18L plastic drums and 200L iron drums.

Precautions for use

This product is flammable and the storage temperature should be below 50℃.

Handle with care during storage and transportation, and it is strictly forbidden to use dangerous actions such as falling, throwing, and bumping.

The storage place should be ventilated, dry, and cool, and it is strictly prohibited to expose to direct sunlight or outdoor.

It is strictly prohibited to knock and keep away from fire. Do not put it upside down.

Health, safety and environmental protection

1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.

2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.

3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.

    • Name of product
    • Product Introduction
    • Top XA composite aluminum grease
    • Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
    • MORE
    • Top HV low condensation hydraulic oil
    • Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
    • MORE
    • Top HFC water-glycol fire resistant hydraulic oil
    • Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
    • MORE
    • Top AHM ashless anti-wear hydraulic oil
    • Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
    • MORE
    • Super MHM special anti-wear hydraulic oil for construction machinery
    • Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
    • MORE
  • Previous page
    1
    2
    淄特股份
    淄特股份

    Official WeChat Scan to follow

    COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd.      鲁ICP备15562099号-1   Powered by: www.300.cn