logo

  EN

搜索
确认
取消
产品中心

产品中心

PRODUCTS CENTER

/
/
/
/
/
Top ZT4410 (OA-2) synthetic oil and gas lubricants

Top ZT4410 (OA-2) synthetic oil and gas lubricants

Product description

Overview

Top (拓普) ZT4410 (OA-2) synthetic oil and gasoline lubricants are refined with high-quality and deep-refined base oils, using scientific formula and advanced blending technology, and adding a variety of high-quality high-performance additives.

Main performance

Excellent thermal oxidation stability and anti-coking performance, can keep the equipment clean.

Good lubrication performance, can meet the lubrication needs of equipment.

Excellent anti-rust and anti-corrosion performance to prevent corrosion of metal parts.

Good water separation performance makes it easy to separate the condensed water in the compressed air.

USE

This product is suitable for lubrication systems that use oil and gas lubrication devices, such as: bearings for various cold and hot strip rolling mills, wire and bar rolling mills, continuous casting machines and auxiliary equipment in the metallurgical industry, high-speed spindles of various grinders, and cement and chemical industries Lubrication of large open gears (such as ball mills, rotary kilns, etc.), various guide rails, wheel flanges and tracks.

Applicable temperature range: -10℃~120℃, up to 150℃ in short term.

Main Specifications

Project

Quality Index

 

150

220

320

460

680

Kinematic viscosity, (40℃) mm2/s

144.5

218

323

458

667

Viscosity index

99

98

98

97

112

Open flash point, ℃

271

275

277

283

264

Pour point, ℃

-16

-15

-12

-12

-10

Four-ball sintering load Pd, N

2690

2960

3087

3087

3090

(The typical data here is an average value and is for reference only. The specific value may vary with each test condition or customer requirements)

Packing specification

This product is packed in 18L plastic drum or 200L iron drum.

Precautions for use

1. This product must not be mixed with other lubrication products, and physical and chemical reactions may occur between different lubricating products, resulting in a significant decrease in performance.

2. After use, the cover should be sealed in time to avoid mixing of impurities such as moisture and dust.

3. This product has a certain amount of evaporation loss under high temperature. When using it, pay special attention to opening the air duct of the setting machine to avoid accidents.

Health, safety and environmental protection

1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.

2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.

3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.

    • Name of product
    • Product Introduction
    • Top XA composite aluminum grease
    • Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
    • MORE
    • Top HV low condensation hydraulic oil
    • Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
    • MORE
    • Top HFC water-glycol fire resistant hydraulic oil
    • Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
    • MORE
    • Top AHM ashless anti-wear hydraulic oil
    • Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
    • MORE
    • Super MHM special anti-wear hydraulic oil for construction machinery
    • Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
    • MORE
  • Previous page
    1
    2
    淄特股份
    淄特股份

    Official WeChat Scan to follow

    COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd.      鲁ICP备15562099号-1   Powered by: www.300.cn