logo

  EN

搜索
确认
取消
产品中心

产品中心

PRODUCTS CENTER

/
/
/
/
/
Top ZT4402 fully synthetic heat setting oil

Top ZT4402 fully synthetic heat setting oil

Product description

Overview

Top (拓普) ZT4402 fully synthetic heat setting engine oil is refined with high-quality synthetic oil as the base oil, using scientific formula and advanced blending technology, and adding antioxidants and other additives. According to the use temperature and viscosity, it is divided into three grades: ZT4402, ZT4402-1 and ZT4402-2, and implements the SH/T0010 standard.

Main performance

With high viscosity index and excellent viscosity-temperature performance, it can not only meet the high-temperature lubrication requirements of the setting machine, but also ensure the start-up at room temperature.

has a high flash point, which can ensure the safe operation of the heat setting machine.

It has the property of decomposing under thermal oxidation conditions and cracking into small molecular substances, so that carbon deposits in the chain and track of the setting machine are very small, and the coking is easy.

USE

This product is suitable for the lubrication of domestic M751, M771, ZH921 and Nissin, Alum, Regen and Micron heat setting machines in the textile industry and the imported SST resin finishing machine track and chain. The maximum operating temperature is 200℃.

Main Specifications

Project

Quality Index

Experiment Method

ZT4402

ZT4402-1

ZT4402-2

Kinematic viscosity, (100℃) mm2/s

32.1

35.2

72.1

GB/T265

Viscosity index

189

152

221

GB/T1995

Open flash point, ℃

268

270

270

GB/T3536

Neutralization value, mg KOH/g

0.05

0.05

0.05

GB/T4945

(The typical data here is an average value, for reference only, the specific value may vary due to each test condition or customer requirements)

Packing specification

This product is packed in 18L plastic drum or 200L iron drum.

Precautions for use

1. This product must not be mixed with other lubrication products, and physical and chemical reactions may occur between different lubricating products, resulting in a significant decrease in performance.

2. After use, the cover should be sealed in time to avoid mixing of impurities such as moisture and dust.

3. This product has a certain amount of evaporation loss under high temperature. When using it, pay special attention to opening the air duct of the setting machine to avoid accidents.

Health, safety and environmental protection

1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.

2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.

3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.

    • Name of product
    • Product Introduction
    • Top XA composite aluminum grease
    • Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
    • MORE
    • Top HV low condensation hydraulic oil
    • Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
    • MORE
    • Top HFC water-glycol fire resistant hydraulic oil
    • Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
    • MORE
    • Top AHM ashless anti-wear hydraulic oil
    • Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
    • MORE
    • Super MHM special anti-wear hydraulic oil for construction machinery
    • Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
    • MORE
  • Previous page
    1
    2
    淄特股份
    淄特股份

    Official WeChat Scan to follow

    COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd.      鲁ICP备15562099号-1   Powered by: www.300.cn