Top KN Knitting Machine Advanced Special Lubricant
Top ZKN high-grade special lubricant for knitting machine adopts high-quality hydrogenated base oil, adding high-quality anti-oxidation, anti-rust, extreme pressure anti-wear, anti-foam and other functional additives, and is formulated by scientific formula and advanced production technology. to make.
This product has good lubricating performance and anti-rust performance, especially for inhibiting hand sweat on the needle body. Even if the fabric is contaminated by oil stains, it is easy to wash, and it can be kept clean.
This product is colorless and suitable for the lubrication of various knitting machines (such as glove knitting machines, hosiery knitting machines, circular knitting machines, large circular knitting machines, high-speed circular knitting machines, etc.). Such as: Germany Meyer, Dele, Taiwan Bolong, Daxiang, British Kember, South Korea King Long, Ssangyong and other looms. It can effectively protect the loom, reduce needle loss, and reduce the rate of defective products caused by oil stains.
Kinematic viscosity, mm2/s40℃
Open flash point, ℃ not lower than
Pour point, ℃ not higher than
Neutralization value, mgKOH/g is not greater than
Corrosion (T3 copper sheet, 100℃, 3h)
(The typical data here is an average value and is for reference only. The specific value may vary with each test condition or customer requirements)
This product is packed in 18L plastic drum and 170kg iron drum.
Precautions for use
1. The new loom has a heavier starting load due to the lack of running-in between the needle cylinder and the knitting needle, so the running speed of the loom should be lowered. Use it continuously for about 15 days, then clean the oil circuit, replace with new needles, and add lubricating oil to increase the running speed of the loom to avoid damage to the needle cylinder and knitting needles by impurities after running-in. The running-in time can also be appropriately increased, and the maintenance of the loom is better if the needle is changed multiple times and the oil circuit is cleaned.
2. The company will adjust the viscosity of the product appropriately according to the climate (refers to winter and summer), and it is generally thinner in winter than in summer. Users can directly consult our company and local agents and distributors;.
3. The oil storage, oil pipe and nozzle must be cleaned before use, and the oil supply should be adjusted according to different requirements.
4. This product will emulsify when it meets with water. During storage, transportation and use, it is necessary to avoid mixing with moisture and impurities to avoid affecting the use effect.
5. Please seal and store away from light.
Health, safety and environmental protection
1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.
2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.
3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.
- Name of product
- Product Introduction
- HL high temperature resistant synthetic heat transfer oil
- Product Introduction It is made from chemically synthesized base oil after adding a certain proportion of high-efficiency compounding agent and other
- High temperature resistant synthetic heat transfer oil
- Product Introduction It is made from synthetic base oil by adding a certain proportion of high temperature resistant compound additives and refined b
- Top HV low condensation hydraulic oil
- Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
- Top HFC water-glycol fire resistant hydraulic oil
- Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
- Top AHM ashless anti-wear hydraulic oil
- Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
- Super MHM special anti-wear hydraulic oil for construction machinery
- Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.