logo

  EN

搜索
确认
取消
产品中心

产品中心

PRODUCTS CENTER

/
/
/
/
/
Super HGT250 synthetic high temperature chain oil

Super HGT250 synthetic high temperature chain oil

Product description

Overview

Super (Shubo) HGT250 synthetic high temperature chain oil is refined with high-quality synthetic oil as the base oil, using scientific formula and advanced blending technology, and adding antioxidant, anti-wear, anti-rust and other additives.

Main performance

This product has good high temperature stability, and the use temperature can reach 280℃.

Outstanding lubrication and wear resistance, can withstand heavier loads. With little carbon residue, the chain can be kept clean for a long time.

Good viscosity and temperature, the machine is easy to start at low temperature.

Less volatility, can effectively save lubricating oil, not pollute the environment, and improve working conditions.

USE

This product is suitable for stretching machines, heat setting machines (such as Taiwan Chengfu, Ligen, Korea Micron, Nisshin, etc.), spray dryers, coating machines, hot-pressing wood lines, Lubrication of chain drive systems in high-temperature equipment in continuous drying lines such as canning drying lines, biaxially oriented film lines, and high-temperature drying rooms in the building materials industry.

Using temperature range: -20~+280℃.

Main Specifications

Project

Quality Index

Experiment Method

Kinematic viscosity, (100℃) mm2/s

26~29

GB/T265

Viscosity index is not less than

120

GB/T1995

Open flash point, ℃ not lower than

255

GB/T3536

Pour point, ℃ not more than

-5

GB/T3535

Neutralization value, mg KOH/g is not greater than

0.5

GB/T4945

Evaporation capacity (204℃, 6.5h),% m/m is not more than

10

SH/T0059

(The typical data here is an average value, for reference only, the specific value may vary due to each test condition or customer requirements)

Packing specification

This product is packed in 4L or 18L plastic drums.

Precautions for use

1. Because the chain itself contains oil such as rust inhibitor, the new machine will produce sludge during the first use, so it should be cleaned in time.

2. For machinery that has used the same type of chain oil, this product can be added directly. At the beginning of the replacement, the amount of fuel should be increased appropriately. After entering the normal use state, it will be the same as other similar products. Such as: "PRIMIUM FLUID-SPECIAL" from KLUBER in Germany and "CL-175" high temperature chain oil from ROCOCL in the UK;

3. The oil consumption can be adjusted according to the actual conditions such as the tightness of the chain, the lightness of the motor load and the production time;

4. If the machine is not used for a long time, it should be stored after refueling and proper daily maintenance.

5. Please seal and store away from light.

Health, safety and environmental protection

1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.

2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.

3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.

    • Name of product
    • Product Introduction
    • Top XA composite aluminum grease
    • Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
    • MORE
    • Top HV low condensation hydraulic oil
    • Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
    • MORE
    • Top HFC water-glycol fire resistant hydraulic oil
    • Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
    • MORE
    • Top AHM ashless anti-wear hydraulic oil
    • Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
    • MORE
    • Super MHM special anti-wear hydraulic oil for construction machinery
    • Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
    • MORE
  • Previous page
    1
    2
    淄特股份
    淄特股份

    Official WeChat Scan to follow

    COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd.      鲁ICP备15562099号-1   Powered by: www.300.cn