PRODUCTS CENTER
Senior FD spindle oil
Overview
Senior (Shineng) FD spindle oil is made of highly refined light component base oil with anti-wear and anti-rust additives. Implement SH 0017-90 standard.
Main performance
Good viscosity-temperature performance, excellent lubricity and abrasion resistance, extend the life of the spindle and bearing; reduce noise; good oxidation resistance.
USE
This product is colorless, suitable for the lubrication of spindles and bearings of high-tech equipment, precision machine tools and textile equipment with high speed and small gap. It is especially suitable for the lubrication of knitting and spinning spindles, as well as the high-speed bearings of machine tools. It can also be used as a low-viscosity hydraulic oil.
Main Specifications
Item |
Quality Index |
|||||
Brand |
FD2 |
FD3 |
FD5 |
FD7 |
FD10 |
FD15 |
Kinematic viscosity, mm2/s(40℃) |
1.98~2.42 |
2.88~3.52 |
4.14~5.06 |
6.12~7.48 |
9.0~11.0 |
13.5~16.5 |
Acid value, mgKoH/g is not greater than |
0.4 |
0.4 |
0.4 |
0.4 |
0.4 |
0.4 |
Open flash point, ℃ not lower than |
|
|
|
115 |
130 |
150 |
Closed flash point, ℃ not lower than |
70 |
80 |
90 |
|
|
|
Freezing point, ℃ not higher than |
-12 |
|||||
腐蚀实验(铜片100℃,3h) |
Qualified |
(The typical data here is an average value and is for reference only. The specific value may vary with each test condition or customer requirements)
Packing specification
This product is packed in 18L plastic drums and 200L iron drums.
Precautions for use
This product is flammable and the storage temperature should be below 50℃.
Handle with care during storage and transportation, and it is strictly forbidden to use dangerous actions such as falling, throwing, and bumping.
The storage place should be ventilated, dry, and cool, and it is strictly prohibited to expose to direct sunlight or outdoor.
It is strictly prohibited to knock and keep away from fire. Do not put it upside down.
Health, safety and environmental protection
1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.
2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.
3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.
- Name of product
- Product Introduction
- Top XA composite aluminum grease
- Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
- MORE
- Top XLD universal low noise bearing grease
- Product Introduction Top XLD universal low-noise bearing lubrication system is manufactured by imported mineral base oil thickened with high-grade fa
- MORE
- Top XLE small and medium motor bearing grease
- Product Introduction Top XLE medium and small motor bearing grease is refined by advanced production technology with fatty acid lithium soap thickene
- MORE
- HL high temperature resistant synthetic heat transfer oil
- Product Introduction It is made from chemically synthesized base oil after adding a certain proportion of high-efficiency compounding agent and other
- MORE
- High temperature resistant synthetic heat transfer oil
- Product Introduction It is made from synthetic base oil by adding a certain proportion of high temperature resistant compound additives and refined b
- MORE
- HL-400 liquid and gas phase heat transfer oil
- Product Introduction The liquid and gas phase heat transfer oil is a eutectic mixture of biphenyl and diphenyl ether copolymerized with a mass ratio
- MORE
- Top HV low condensation hydraulic oil
- Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
- MORE
- Top HFC water-glycol fire resistant hydraulic oil
- Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
- MORE
- Top AHM ashless anti-wear hydraulic oil
- Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
- MORE
- Super MHM special anti-wear hydraulic oil for construction machinery
- Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
- MORE
Official WeChat Scan to follow
COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd. 鲁ICP备15562099号-1 Powered by: 国际站建设:中企动力 淄博