logo

  EN

搜索
确认
取消
产品中心

产品中心

PRODUCTS CENTER

/
/
/
/
Super XPHT high temperature and high speed motor bearing special grease

Super XPHT high temperature and high speed motor bearing special grease

Product description

Overview

Super (Shubo) XPHT special grease for high temperature and high motor bearings is a highly refined base oil thickened with organic thickeners with high viscosity index, and added with anti-oxidation, anti-rust, anti-corrosion, anti-wear, extreme pressure, etc. A variety of additives, made by a unique production process.

Main performance

The long service life is five to ten times that of lithium-based grease.

Good high-speed resistance, which can meet the long-term operation of bearings with a DN value of 500,000.

Excellent high temperature resistance, can meet the requirements of high temperature H-type motors.

Outstanding lubrication performance can not only meet the requirements of small and medium motors, but also meet the requirements of large and extra-large motors.

Excellent water resistance and good resistance to acids and alkalis.

use

This product is suitable for large, medium and small motor bearings with a DN value of less than 500,000. It is especially suitable for H-type motors, high-speed secondary motors and large motors, or the chemical industry is exposed to acid, alkali gas, Motors under harsh conditions such as water vapor. The same applies to the lubrication of pumps, fans and other mechanical parts under the above conditions.

Using temperature range: -20℃~230℃.

Main Specifications

Project

Quality Index

experiment method

Super XPHT 2

Super XPHT 3

 

Exterior

Light yellow uniform ointment

Visual inspection

Working cone penetration 0.1mm

265~295

220~250

GB/ T269

Dropping point °C

315

320

GB/ T4929

Stencil oil separation (100℃, 24h)%

1.3

1.0

SH/ T0324

Similar viscosity(-10℃,10s-1Pa.s

600

1000

SH/T0048

Evaporation(99℃,22h%

0.6

0.4

GB/T7325

Roller change rate:+0%

+10%0.1mm

9

13

9

12

SH/T0122

Corrosion (T2 copper sheet, 100℃, 24h)

No green or black change in copper

GB/T7326(B)

(The quality index data here is an average value and is for reference only. The specific value may vary due to each test condition or customer requirements)

Packing specification

This product is packaged in 0.8kg/drum×12 (box), 15kg plastic drum or 180kg open iron drum.

Precautions for use

1. Any lubrication products should be stored indoors or under shelters.

2. When outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion, and to prevent the mark on the oil drum from being corroded.

3. The product should not be stored in an environment above 60°C or in severe cold, and should not be exposed to strong light, sealed and protected from light.

Health, safety and environmental protection

1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.

2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.

3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.

    • Name of product
    • Product Introduction
    • Top XA composite aluminum grease
    • Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
    • MORE
    • Top HV low condensation hydraulic oil
    • Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
    • MORE
    • Top HFC water-glycol fire resistant hydraulic oil
    • Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
    • MORE
    • Top AHM ashless anti-wear hydraulic oil
    • Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
    • MORE
    • Super MHM special anti-wear hydraulic oil for construction machinery
    • Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
    • MORE
  • Previous page
    1
    2
    淄特股份
    淄特股份

    Official WeChat Scan to follow

    COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd.      鲁ICP备15562099号-1   Powered by: 国际站建设:中企动力 淄博