

PRODUCTS CENTER
Super XPC gearbox anti-leakage advanced special grease
Overview
Super (Shubo) XPC gearbox anti-leakage advanced special grease is a highly refined base oil thickened with an organic thickener with a high viscosity index and added with anti-oxidation, anti-rust, anti-corrosion, anti-wear, extreme pressure, etc. A variety of additives, made by a special production process.
Main performance
Excellent self-sealing and plugging effect, less lubricant leakage
Excellent lubrication timeliness. In the process of gear meshing and friction, a unique lubricating molecular protective film is formed on the surface of the friction width. The protective film has excellent anti-wear, anti-wear, extreme pressure, transfer and regeneration capabilities, effectively extending the maintenance cycle
Eliminate the adverse effects of oil-free starting
has good shear stability, oxidation stability and load-carrying capacity, which is 2 to 3 times that of ordinary grease
Reduced noise and enhanced safety and reliability
has a good filling and repairing effect. During the application process, the solid lubricating particles contained in it are stored and filled into the micro-pits and pits on the metal surface, so the new equipment does not need to run-in, and the old equipment can be repaired
Good overall cost. The amount of grease is small, 1/5~1/10 of ordinary grease, which can save a lot of oil resources, purify the environment, and reduce the time and frequency of maintenance.
USE
In many cases, the gearbox is lubricated with gear oil, but the gear oil is easy to leak, which not only pollutes the working environment, but also brings unnecessary trouble to safe production. Super XPC is a leak-proof grease specially developed to reduce this problem. It is a successful case of grease replacement. At the same time, Super XPC has excellent shear stability, load carrying capacity, and coating protection characteristics that eliminate the risk of oil-free starting.
is suitable for lubrication and sealing of friction parts such as various gearboxes, worm gear reducers and open gears.
Applicable temperature range: -20℃~150℃.
Main Specifications
Project |
Quality Index |
Experiment Method |
||
Super XPC00 |
Super XPC000 |
|||
Working cone penetration 0.1mm |
400~430 |
445~475 |
GB/T269 |
|
Dropping point °C |
245 |
240 |
GB/T4929 |
|
Corrosion (T2 copper sheet, 100℃, 24h) |
No green or black change in copper |
GB/T7326(乙) |
||
Anti-corrosion (25℃, 48h) level |
First level |
First level |
GB/T5018 |
|
Oxidation stability (99℃, 100h, 0.76MPa) pressure drop MPa |
0 |
0 |
SH/T0325 |
|
Four ball test |
Card bite load (PB, N) Sintering load (PD, N) |
100×9.8 250×9.8 |
100×9.8 250×9.8 |
GB/T3142 |
(The quality index data here is an average value and is for reference only. The specific value may vary due to each test condition or customer requirements)
Packing specification
This product is packed in 15kg plastic drum or 170kg open iron drum.
Precautions for use
1. Any lubrication products should be stored indoors or under shelters.
2. When outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion and to prevent the markings on the oil drum from being corroded.
3. The product should not be stored in an environment exceeding 60°C or severely cold, and should not be exposed to strong light, sealed and protected from light.
4. N32 mechanical oil for newly installed reducer is cleaned after 24 hours of running-in. Then add the semi-fluid grease, and add the semi-fluid grease after cleaning the old reducer. The old reducer that is difficult to clean can also be added directly to the semi-fluid grease after the old oil is discharged.
5. The amount of grease can reach the large tooth root of the intermediate shaft, and the other tooth surfaces should be greased. Or add grease to the small gear, the large gear does not exceed three teeth.
Health, safety and environmental protection
1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.
2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.
3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.
- Name of product
- Product Introduction
- Top XA composite aluminum grease
- Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
- MORE
- Top XLD universal low noise bearing grease
- Product Introduction Top XLD universal low-noise bearing lubrication system is manufactured by imported mineral base oil thickened with high-grade fa
- MORE
- Top XLE small and medium motor bearing grease
- Product Introduction Top XLE medium and small motor bearing grease is refined by advanced production technology with fatty acid lithium soap thickene
- MORE
- HL high temperature resistant synthetic heat transfer oil
- Product Introduction It is made from chemically synthesized base oil after adding a certain proportion of high-efficiency compounding agent and other
- MORE
- High temperature resistant synthetic heat transfer oil
- Product Introduction It is made from synthetic base oil by adding a certain proportion of high temperature resistant compound additives and refined b
- MORE
- HL-400 liquid and gas phase heat transfer oil
- Product Introduction The liquid and gas phase heat transfer oil is a eutectic mixture of biphenyl and diphenyl ether copolymerized with a mass ratio
- MORE
- Top HV low condensation hydraulic oil
- Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
- MORE
- Top HFC water-glycol fire resistant hydraulic oil
- Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
- MORE
- Top AHM ashless anti-wear hydraulic oil
- Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
- MORE
- Super MHM special anti-wear hydraulic oil for construction machinery
- Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
- MORE


Official WeChat Scan to follow
COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd. 鲁ICP备15562099号-1 Powered by: 国际站建设:中企动力 淄博