logo

  EN

搜索
确认
取消
产品中心

产品中心

PRODUCTS CENTER

Senior XLJ reducer grease

Product description

Overview

Senior (Shineng) XLJ reducer grease is made of fatty acid lithium soap thickened refined mineral oil, and added with extreme pressure anti-wear, anti-oxidation, anti-rust and other additives, refined by advanced production technology.

Main performance

It has excellent leak-proof performance, rust-proof performance, oxidation stability and good ability to withstand large loads or shock loads. Long service life can reduce equipment maintenance.

Use

Suitable for long-term lubrication of various medium and heavy-duty gear drives or worm gear drive systems and P-type chain speed changers. It is especially suitable for the lubrication of enclosed full-life gearboxes, boiler row feed gearboxes, gear chain stepless transmissions, and cycloid reducers that require long service life and low maintenance. It can also be used for lubrication of centralized grease supply equipment.

Using temperature range: -20℃~120℃.

Main Specifications

Item

Typical data

experiment method

 

00#

000#

 

Working cone penetration 0.1mm

418

461

GB/T269

Dropping point °C            

-

-

GB/T4929

Corrosion (T2 copper sheet, 100℃, 24h)

No green or black change in copper

GB/T7326(B)

Anti-corrosion (25℃, 48h) level

First level

First level

GB/T5018

Oxidation stability (99℃, 100h, 0.76MPa) pressure drop MPa

0

0

SH/T0325

(The quality index data here is an average value and is for reference only. The specific value may vary due to each test condition or customer requirements)

Packing specification

This product is packed in 15kg plastic drum or 180kg open iron drum.

Precautions for use

1. The newly installed reducer uses N32 mechanical oil to clean after 24 hours of running-in. Then install the semi-fluid grease, the semi-fluid grease can be added after cleaning the old reducer, and the old reducer that is difficult to clean can also be added directly after the old oil is discharged.

2. The amount of grease can reach the large tooth root of the intermediate shaft, and the other tooth surfaces are greased. Or add grease to the small gear, the large gear does not exceed three teeth.

3. Any lubrication products should be stored indoors or under obstructions.

4. When outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion, and to prevent the mark on the oil drum from being corroded.

5. The product should not be stored in an environment exceeding 60°C or severe cold, and should not be exposed to strong light, sealed and protected from light.

Health, safety and environmental protection

1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.

2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.

3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.

    • Name of product
    • Product Introduction
    • Top XA composite aluminum grease
    • Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
    • MORE
    • Top HV low condensation hydraulic oil
    • Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
    • MORE
    • Top HFC water-glycol fire resistant hydraulic oil
    • Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
    • MORE
    • Top AHM ashless anti-wear hydraulic oil
    • Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
    • MORE
    • Super MHM special anti-wear hydraulic oil for construction machinery
    • Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
    • MORE
  • Previous page
    1
    2
    淄特股份
    淄特股份

    Official WeChat Scan to follow

    COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd.      鲁ICP备15562099号-1   Powered by: 国际站建设:中企动力 淄博