PRODUCTS CENTER
Senior XLG special grease for construction machinery
Overview
Senior (施能) XLG engineering machinery special grease is thickened with fatty acid lithium soap refined mineral oil, and added with extreme pressure anti-wear, anti-oxidation, anti-rust and other additives, refined by advanced production technology, in line with GB/T7324 standard .
Main performance
It has excellent water resistance, mechanical stability, rust resistance, and oxidation stability. Can replace calcium-based and sodium-based grease products.
Use
It is suitable for the lubrication of various excavators, loaders and other construction machinery with harsh field working conditions and various friction parts of construction machinery.
Using temperature range: -20℃~120℃.
Main Specifications
Item |
Typical data |
experiment method |
||
|
Senior XL1 |
Senior XL2 |
Senior XL3 |
|
Exterior |
Light yellow to brown uniform smooth ointment |
Visual inspection |
||
Working cone penetration 0.1mm |
310~340 |
265~295 |
220~250 |
GB/T269 |
Dropping point °C |
172 |
179 |
184 |
GB/T4929 |
Stencil oil separation (100℃, 24h)% |
3.1 |
2.3 |
1.6 |
SH/T0324 |
Water leaching loss (38℃, 1h)% |
4.5 |
3.1 |
1.9 |
SH/T0109 |
Extended work cone penetration (100,000 times) 0.1mm |
380 |
330 |
310 |
GB/T269 |
Similar viscosity (-10℃, 10s-1) Pa.s |
600 |
800 |
1000 |
SH/T0048 |
(The quality index data here is an average value and is for reference only. The specific value may vary due to each test condition or customer requirements)
Packing specification
This product is packed in 15kg plastic drum or 180kg open iron drum.
Precautions for use
1. Any lubrication products should be stored indoors or under shelters.
2. When outdoor storage is unavoidable, horizontal placement should be considered first to avoid rain or humid air intrusion and to prevent the markings on the oil drum from being corroded.
3. The product should not be stored in an environment exceeding 60°C or severely cold, and should not be exposed to strong light, sealed and protected from light.
Health, safety and environmental protection
1. Information on health, safety and environmental protection is provided in the "Material Safety Data Sheet" (MSDS) of Zite series products, which includes reminders of potential hazards, appropriate disaster prevention and emergency rescue measures, and environmental factors and waste Processing etc.
2. It should be noted that used lubricants contain potentially harmful contaminants, and prolonged or repeated skin contact with any type and form of used oil must be avoided.
3. If the user does not follow the use specifications or precautions, or even not in the specified use, Zite shares will not bear any responsibility. If the user wants to use the product for other purposes that are not recommended, please contact the local agent, distributor or company or marketing engineer of Zite in advance, and we will give you appropriate advice as soon as possible.
- Name of product
- Product Introduction
- Top XA composite aluminum grease
- Product Introduction Top (拓普) XA composite aluminum-based grease is refined by mineral oil thickened by a new thicker and additives such as antioxida
- MORE
- Top XLD universal low noise bearing grease
- Product Introduction Top XLD universal low-noise bearing lubrication system is manufactured by imported mineral base oil thickened with high-grade fa
- MORE
- Top XLE small and medium motor bearing grease
- Product Introduction Top XLE medium and small motor bearing grease is refined by advanced production technology with fatty acid lithium soap thickene
- MORE
- HL high temperature resistant synthetic heat transfer oil
- Product Introduction It is made from chemically synthesized base oil after adding a certain proportion of high-efficiency compounding agent and other
- MORE
- High temperature resistant synthetic heat transfer oil
- Product Introduction It is made from synthetic base oil by adding a certain proportion of high temperature resistant compound additives and refined b
- MORE
- HL-400 liquid and gas phase heat transfer oil
- Product Introduction The liquid and gas phase heat transfer oil is a eutectic mixture of biphenyl and diphenyl ether copolymerized with a mass ratio
- MORE
- Top HV low condensation hydraulic oil
- Product Introduction Top HV low-condensing hydraulic oil adopts high-quality deeply refined high-viscosity index base oil, adds high-quality anti-oxidation, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula to implement GB/T11118 .1-2011 standard.
- MORE
- Top HFC water-glycol fire resistant hydraulic oil
- Product Introduction Top (拓普) HFC water-glycol anti-wear hydraulic oil is based on ethylene glycol, with synthetic ester and added with various additives such as anti-oxidation, anti-rust, anti-foam, extreme pressure and anti-wear, etc. It is formulated by scientific production technology. Become.
- MORE
- Top AHM ashless anti-wear hydraulic oil
- Product Introduction Top (拓普) AHM ashless anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives, and is formulated by scientific formula, and implements GB/T11118. 1-2011 standard.
- MORE
- Super MHM special anti-wear hydraulic oil for construction machinery
- Product Introduction Super (Shubo) MHM engineering machinery advanced special anti-wear hydraulic oil adopts high-quality deeply refined base oil, adds high-quality anti-oxidant, anti-rust, extreme pressure and anti-wear and other functional additives. It is formulated by scientific formula and executes GB/ T11118.1-2011 standard.
- MORE
Official WeChat Scan to follow
COPYRIGHT © 2020 Shandong North Zite Special Oil Co., Ltd. 鲁ICP备15562099号-1 Powered by: 国际站建设:中企动力 淄博